#T head cotter pins install#

Fasten or remove components on equipment with a spring-loaded retaining ball or built-in magnet. Hammer lock cotter pins require a hammer to install, which will close the ends of the prongs together. An alternative to bolts and rivets, secure parts together and lock in place with a cotter pin. R-clip cotter pins feature a curved prong that wraps around the side of components. Extended prong cotter pins are bent around the back of components manually. Each type, though, works in a different way. They all consist of a single piece of bent metal with two prongs. As you strike the head with a hammer, the ends of the prongs will close together.Įxtended prong, R-clip and hammer lock are some of the most common cotter pins. You can use a hammer lock cotter pin by inserting it into a hole and then striking it with a hammer. The end of the long prong curved inward towards the opposite, shorter prong. The only difference is that hammer lock cotter pins are curved on the end. They look like extended prong cotter pins. Hammer lock cotter pins are a type of locking fastener that, as the name suggests, requires a hammer to install. Pins lock in place until you push the button to release the spring-loaded retaining balls. Spin the handle up or down, then tighten the locknut to change the length by up to. These pins adjust to take up play in a system or hold parts in holes of varying thicknesses.

#T head cotter pins install#

Easier to install and remove than standard clevis pins, these pins have a ring-grip handle. Install or remove these pins from either side. The bend makes them easy to insert and pull out. The curved prong should then wrap around the side of the cylindrical-shaped component Hammer Lock Adjustable-Length Locking Quick-Release Pins. These pins have multiple through holes change the length by moving the cotter pin. To use an R-clip cotter pin, you’ll need to insert the straight prong into a hole. The other prong on an R-clip cotter pin is curved. They feature two prongs - just like extended prong cotter pins. R-shaped cotter pins are used around cylindrical-shaped components, such as tooling balls. Rather, R-clip cotter pins feature an R-shaped design. They don’t feature the same U-shaped design as extended prong cotter pins. R-clip cotter pins are made of metal as well, but they are shaped differently. Bending the ends of the prongs will secure the cotter pin and, thus, the component with which it’s used.

You can then bend the ends of the prongs around the back of the component. To use an extended prong cotter pin, simply insert it into a hole. One of the prongs is slightly longer than the other prong. As shown in the adjacent photo, extended prong cotter pins feature two long and narrow parallel prongs. One of the most common types of cotter pins is extended prong. While all cotter pins function as metal fasteners, though, they are available in different types. And you can typically remove cotter pins by pulling them out of the hole. You can insert a cotter pin into a hole to secure a component. Also known as split pins, they are designed for use in holes. Cotter pins are fasteners consisting of a piece of metal.